It is crucial to operate a high and low temperature test chamber correctly. Improper operation of the equipment may lead to errors in test results or even interrupt the test. How should the high and low temperature test chamber be used? You can follow the steps below to conduct the test.
To start the test, the first step is to turn on the power supply. After connecting and switching on the main power, pour water into the water storage tank and check the water level in the humidifier to ensure that the water covers the heating element. Next, thoroughly soak a piece of gauze and hang it on the wet bulb sensor, placing it in the wet bulb trough with equal lengths on both sides. Then, use a liquid level switch to adjust the water level in the wet bulb tank. If the water level is too high, the liquid level switch will automatically regulate it; if it is too low, additional water needs to be added.

Press the device power switch to turn it on, and the indicator light will light up. At this point, the operator needs to set the temperature, humidity, and test duration according to the equipment’s user manual, as different materials require different settings. After setting the parameters, start the test process. During the test, the operator should monitor the progress in real-time and conduct relevant test inspections as required. If any unexpected situations occur during the operation, it is necessary to troubleshoot and handle them promptly. Once the test is completed within the set time, the operator should promptly turn off the power, remove the test samples, and clean up any debris.
This is the introduction to the operation and usage method of the high and low temperature test chamber by the editor. In fact, there are many more details to pay attention to during the use of the equipment. For more information, you can visit our company’s website. The high and low temperature test chamber simulates the temperature changes in the atmospheric environment to test the weather resistance of objects. The simulated environment of this equipment is very close to natural climate, and the accuracy of the test results is relatively high. Materials such as electronic components and automotive parts can be tested with this equipment. Through testing, the quality of materials can be assessed, thereby continuously optimizing material design and improvement.