In many production workshops of enterprises, constant temperature and humidity test chambers are often indispensable pieces of equipment. However, many operators tend to overlook the daily cleaning of these devices during use, leading to a rapid accumulation of grease and dust on the equipment. In modern enterprises that emphasize production site management, the 6S on-site management model has been widely applied, and the cleanliness of equipment is an important part of it. Only by keeping the equipment clean and hygienic can a beautiful and tidy production environment be created. So, how should the various parts of a constant temperature and humidity test chamber be cleaned, and what should be paid attention to? Let’s take a detailed look.

The refrigeration system is the core part of the constant temperature and humidity test chamber, and the condenser is a key component within it. If the condenser is not cleaned regularly, the accumulated dust can easily cause the machine’s protection system to generate false alarms. To address this, we can use a vacuum cleaner, brush, or high-pressure air nozzle to remove the dust from the condenser’s heat dissipation mesh, ensuring that its heat dissipation performance remains good and that it does not affect the operation of the equipment due to blockage.

When a constant temperature and humidity test chamber is in an idle state, it is crucial to keep it clean and dry. After use, the water in the water tank and pipes should be completely drained, and then the working chamber should be wiped and dried to prevent the growth of bacteria due to moisture or damage to the equipment components.

The exterior of the chamber body and the distribution room also need to be dusted regularly. When cleaning the exterior of the chamber body, it can be wiped with soapy water or detergent water, but direct rinsing with water should be avoided to prevent damage to the machine.

If the water in the humidifier is not changed in time, it can easily breed bacteria and accumulate dirt. Therefore, it is recommended to change the water in the humidifier once a month, and the humidifier water tray should be cleaned thoroughly during the change to ensure the hygiene and normal operation of the humidification system.

The test cloth of the constant temperature and humidity test chamber will gradually harden or become stained over long-term use, affecting the test results. Therefore, the test cloth also needs to be cleaned regularly, and it is advisable to replace it every three months. When replacing the test cloth, don’t forget to clean the test body at the same time to ensure the accuracy of the test.

A good working environment depends on the efforts of every worker. It is hoped that everyone can develop good cleaning habits and carefully carry out the cleaning and maintenance work of the constant temperature and humidity test chamber in accordance with the specifications. This not only extends the service life of the equipment and keeps it in good working condition but also makes the entire working environment more tidy and comfortable, improving work efficiency and quality.